Reverse osmosis system

Reverse osmosis systems are used to purify water and remove salts and other impurities from tap and brackish water. It is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 daltons. Our largest tap and brackish water units, the JMRO series, comes standard with media pre-filters, chemical dosing, and antiscalant. These systems can be customized to fit individual customer and water application needs.

Reverse osmosis systems


Reverse osmosis systems

Detailed Product Description

Most advanced technolgoy
High quality for each part, 1 year's warranty
One stop service and reliable after sale service

Typical process flow

Raw water Pump + Multi-Medium Filter (Quartz Sand Filter + Activated Carbon Filter + Chemical dosing device + Security Filter) + High pressure Pump + Reverse Osmosis Host (HYDRANAUTICS 4040/8040) + Ultraviolet/Ozone Generator + Pump + Terminal Filter +Pure Water tank

Process and Outlet Water Standards

1. Pre-treatment + one stage RO system (conductivity ≤ 10μS/CM)

2. Pre-treatment + one stage RO system + ion exchange (resistivity 5~10MΩ.CM)

3. Pre-treatment + one stage RO system + EDI (resistivity 5~10MΩ.CM)

4. Pre-treatment + two stage RO system + EDI (resistivity 10~15MΩ.CM)

We use the ion-exchange water softeners for the hard water, or using commercial water-softening chemicals. For most situations with water in hard and very hard classifications, an ion-exchange water softener is the desired alternative. Ion-exchange beads are extremely durable, but after softening a large quantity of hard water the beads become saturated with calcium and magnesium ions. When this occurs, the softener must be regenerated or recharged. This is done by flushing the ion exchange resin with a salt brine solution to replenish the resin with sodium ions. Demand initiated regeneration -- With a demand initiated regeneration unit, all operations are initiated and performed automatically in response to the demand for treated water. The need for regeneration is determined by measuring gallons of water used, or by measuring the change in the electrical conductivity of the resin bed, or by sensing a change in water hardness.

Contact Us

Please contact us for any inquiries. We offer free project designs in all aspects of water treatment to meet your demands according to the quality of raw water and the expecting water quality. We will get back to you within 12 hours!

  • Comment
  • User   Verification Code  点击更换  


设为首页 | 加入收藏 | 联系我们   网站地图 广州洁明水处理设备有限公司版权所有 Copyright © 2007-2012 ICP备案号:粤ICP备07067730号-1

关键字链接:玻璃钢罐体 软化水设备 反渗透设备  盘式过滤器 反渗透膜  坎普尔EDI  塞伟尔超滤膜  Y型隔膜阀  阿图祖控制阀  FLECK控制阀  纯水设备  水处理